![background image](http://html1.mh-extra.com/html/graco/betacell-241d/betacell-241d_operation_2251528019.webp)
19
AutoStart
•
Press to ON; automatically starts the machine in a
preprogrammed sequence. Once started, select the Status
Screen to monitor progress of the AutoStart
•
AutoStart will not start if the Pre poly tank temperature is
below 95 deg F or the Curative is below 80 deg F
•
The data window will record the elapsed time of the AutoStart
cycle
Sleep
Mode
•
Press to ON; automatically sets the machine to a pre set
operating condition as follows:
•
Hydraulic motor OFF
•
Pre Poly flow 30 grams/sec
•
Curative 2 grams/sec
•
Pre Poly heater 120 deg F
•
Curative heater 95 deg F
Auto
Shutdown
•
Pres to shut off the operating components of the machine with
one selector switch
•
Note: if the shutdown is not extended, it will be necessary to
restart the Pre Poly and Curative mixers and tank heaters to be
ready for the next AutoStart
Pilots lights indicate the component state
Summary of Contents for BetaCell 241D
