Graco BetaCell 241D, Operation

Page: 102 / 110

102
BetaCell 241Preventative Maintenance Procedures
(Refer to Standard Maintenance Procedures for Detailed Step-By-Step Instructions)
Gusmer Part
No.
Description Procedure Time
6312-32-230
Curative
Screen
(54150-CSTM
54150-3-61/11)
212.Turn Curative pump off
213.Remove air from Buffer Tank
214.Remove pressure from system.
215.Close curative valves on remote coupling block
216.Remove Filter Plug and remove screen
217.Replace screen with new and replace plug.
218.Open coupling block
219.Charge buffer tank with air
220.Start pump
Tools: Hex Key Set, Open End Wrenches
10 min
6690-7-15
Proximity
Switch
(54150-CSTM
54150-3-61/11)
221.Turn off hydraulic Power unit
222.Remove hydraulic pressure from system.
223.Remove Proximity harness attached to switch.
224.Remove Proximity Switch from rear of cylinder.
225.Replace with new switch.
226.Restart Hydraulic Pump
Tools: Open End Wrenches
10 min
54100-2
Remote Pour
Handle
(54150-CSTM
54150-3-61/11)
227.Remove trigger harness attached to pour handle
228.Remove Velcro straps from hose
229.Replace gun handle with new
230.Reinstall harness.
5 min
54193-011
Orifice
(54150-CSTM
54150-3-61/11)
231.Turn system off and relieve pressure.
232.Close valves on Coupling block
233.With open end wrench, remove and replace orifice in
10 min