Graco BetaCell 241D, Operation

Page: 89 / 110

89
BetaCell 241 Maintenance Procedure
Description Procedure Time
1. Access Machine Control screen via Main Menu on PV
2. Touch Auto Startup
3. Access Status screen via Main Menu on PV
4. System is ready when correct ratio is displayed, temperatures
have reached process temperatures and a green GO is at the
bottom of screen
5. Access Operator screen via Main Menu on PV
6. Select correct Sequence and touch Reset
Auto Startup from
Sleep Mode
7. Trigger Gun
10 min
8. Access Machine Control screen via Main Menu on PV
9. Verify switches on front panel are in run position
10. Touch Auto Startup
11. Access Status screen via Main Menu on PV
12. System is ready when correct ratio is displayed, temperatures
have reached process temperatures and a green GO is at the
bottom of screen
13. Access Operator screen via Main Menu on PV
14. Select correct Sequence and touch Reset
Auto Startup from
Complete Shut Down
(Buffer tank temp. >
100ºF)
15. Trigger Gun
15-20
min
16. Access Tank Control Screen
17. Turn on Curative and Pre poly Agitators
Auto Startup from
Complete Shut Down
(Buffer tank temp. <
90ºF)
18. Turn on Tank heaters. Allow material temperature to increase
above 90ºF.
2 hours