Graco BetaCell 241D, Operation

Page: 91 / 110

91
38. Close and Lock out inlet air ball valve
39. Open air ball valve on top of Curative Buffer tank
40. Close Curative Buffer tank outlet valve
41. Drain pressure in curative line by drain valve in front of
machine
Now maintenance can be performed on the curative system
42. Open Curative Buffer tank outlet valve
43. Close air ball valve on top of Curative Buffer tank
44. Open inlet air ball valve
45. Access Flow Control screen via Main Menu on PV
46. Touch Flow Control Manual
47. Touch Curative Start Motor
48. Access Flow Control Auto, system will increase output
settings
49. Verify ratio and temperatures are at Setpoint
50. Access Operator screen via Main Menu on PV
51. Verify GO condition exists at bottom of screen
52. Select correct Sequence and touch Reset
Start Curative Pump
and Pressurize
System
53. Trigger Gun
5-10 min
54. Access Machine Control screen via Main Menu on PV
55. Touch Pre Poly Stop Motor
56. Close and Lock out inlet air ball valve
57. Open air ball valve on top of Pre Poly Buffer tank
Depressurize Pre
Poly System
58. Close Pre Poly Buffer tank outlet valve
5 min