Graco BetaCell 241D, Operation

Page: 90 / 110

90
19. Access Machine Control screen via Main Menu on PV
20. Verify switches on front panel are in run position
21. Touch Auto Startup
22. Access Status screen via Main Menu on PV
23. System is ready when correct ratio is displayed, temperatures
have reached process temperatures and a green GO is at the
bottom of screen
24. Access Operator screen via Main Menu on PV
25. Select correct Sequence and touch Reset
26. Trigger Gun
27. Access Machine Control screen via Main Menu on PV
28. Touch Sleep Mode
Sleep Mode
NOTE: Sleep Mode should only be used after system is fully
operational.
1 min
29. Access Machine Control screen via Main Menu on PV
Auto Shut Down
(Extended period > 2
days)
30. Touch Auto Shut Down
1 min
31. Access Machine Control screen via Main Menu on PV
32. Touch Auto Shut Down
33. Access Tank Control Screen
34. Turn on Curative and Pre poly Agitators
Auto Shut Down
(Weekend Shutdown)
35. Turn on Tank heaters. Allow material temperature to increase
above 100ºF.
5 min
36. Access Machine Control screen via Main Menu on PV
Depressurize
Curative System
37. Touch Curative Stop Motor
5 min