![background image](http://html1.mh-extra.com/html/graco/betacell-241d/betacell-241d_operation_2251528108.webp)
108
Gusmer Part
No.
Description Procedure Time
352.Close needle valve
353.Remove lock out
354.Follow startup procedure
6316-44 Accumulator
355.Turn hydraulic power unit off via HMI
356.Lock out electrical panel
357.Relieve pressure by turning needle valve CCW and
verify pressure is 0 psi
358.Remove accumulator cap and attach accumulator
harness to accumulator and nitrogen tank
359.Fill with Nitrogen to 1200 psi
360.Remove harness and replace cap
361.Close needle valve
362.Remove lock out
363.Follow startup procedure
Tools: Charging Harness
10 min
Fluid
364.Turn hydraulic power unit off via HMI
365.Lock out electrical panel
366.Drain tank utilizing drain plug at bottom of tank
367.Fill with proper fluid
368.Remove lock out
369.Follow startup procedure
15 min
Motor
(grease)
370.Apply grease to the two grease fittings while motor is
not running; add grease until slight resistance is
encountered
1 min
AC Filter
371.Slide external plastic grill upward
372.Remove metal filter and replace with new
NOTE: Filter must be cleaned and replaced.
NOTE: Metal grill must be cleaned, dried and replaced
if damaged
5 min
Summary of Contents for BetaCell 241D
