Gotting HG G-73650ZD, Basics, Setup And Software

Page: 56 / 158

Documentation HG G-73650ZD | English, Revision 05 | Date: 09.03.2017 | www.goetting-agv.com
54 Chapter 4: Software HG G-73650ZD
4.2.4.7 Base Vector
The table has three columns:
1. 1. column: Shows which value is involved.
2. 2nd column: Output of the value
3. 3. column: Unit of the value
The following values are displayed:
– Position X

X co-ordinate in the base co-ordinate system
– Position Y

Y co-ordinate in the base co-ordinate system
– Position Z

Z co-ordinate in the base co-ordinate system
4.2.4.8 Heading
The table has three columns:
1. 1. column: Shows which value is involved.
2. 2nd column: Output of the value
3. 3. column: Unit of the value
The following values are displayed:
– Heading

Measured angle
– MSEP

Distance between the two GPS antennas
– State

State of the angle calculation
– Tilt

Inclination
– Shift Tilt

Shift of the position due to the inclination