Documentation HG G-73650ZD | English, Revision 05 | Date: 09.03.2017 | www.goetting-agv.com
78
Chapter 4: Software
Note
As the navigation controller only loads a number of parameters once on starting, not all the
parameters of the uploaded file are active right away. If the loaded file is to be used com-
pletely, the navigation controller must be restarted.
4.5.2 Download –> Transfer parameters from navigation controller into a file on
the PC
Download Configuration
transfers the current parameter file from the navigation controller
to the PC. Depending on the setting of the browser, the location on the hard disk where the
file is to be saved must be specified. Alternatively, it can be that the browser transfers the
file directly into its 'Download' folder without a prompt. As default, the file will have the
name
parameter.txt
, no matter what the name of the file was that was transferred into the
navigation controller.
4.6 Segment File menu
Figure 68
Screenshot: Segment File - Upload/Download
On this page, segment files can be downloaded from the navigation controller (
Download
)
or transferred to it (
Upload
). For the upload, the navigation controller must be in the 'Idle'
state and the password must have been entered.
4.6.1 Upload Segment File –> Transfer a segment file from the PC into the naviga-
tion controller
1.
Use the
Select File
button to select the segment file on the hard disk.
ATTENTION!
The name of the segment file must start with
segmente
, e.g.
segmente_01.csv
.
