User Manual for Vital Signs Monitor
5
1
0
Clean the exterior of the connector only.
Dilute the cleanser.
Do not let any liquid flow into the shell or any parts of the monitor.
Do not let the cleanser and disinfectant stay on its surface.
Do not perform high pressure sterilization to the monitor.
Do not put any parts of the monitor or its accessories in the liquid.
If the monitor is accidentally wetted it should be thoroughly dried before use. The rear cover
can be removed by qualified service technician to verify absence of water.
Do not pour the disinfector on its surface while sterilization.
10.3 Cleaning, Sterilization and Disinfection of Accessories
It is recommended to clean the accessories (including sensor, leads and plugs) with a piece of gauze which
has been soaked in 75% Alcohol or 70% Ispropanol before use.
0
Do not use damaged accessories.
0
Accessories can not be entirely immerged into water, liquor or cleanser.
0
Do not use radial, steam or epoxyethane to disinfect accessories.
0
Do wipe off the remained alcohol or ispropanol on the accessories after disinfection, for good
maintenance can extend the life of accessories.
10.4 Storage
If the equipment will not be used for long period of time, wipe it clean and keep it in the packaging, which
shall be kept in a dry and good ventilation place free from dust and corrosive gases.
Storage environment:
ambient temperature: -20~60°C
relative humidity: 10%~95%
atmosphere: 50kPa~107.4kPa
10.5 Transportation
This monitor should be transported by land (vehicle or railway) or air in accordance with the contractual
terms. Do not hit or drop it with force.