User Manual for Vital Signs Monitor
22
4.2 ECG Monitoring Screen
Short pressing “
Display” key to shift the screen view to ECG monitoring screen, as shown in Figure 4.4.
Figure 4.4 ECG Monitoring Screen
Note:
if you need to store the measuring data, please set the option of “store” as “on” on ECG TEMP setting
screen.
4.2.1 Display Screen Description
Title area:
“
Ⅱ ×
1”:
ECG lead status and ECG waveform scale.
“ECG”:
indicate the current monitoring parameter is ECG.
“36.8
℃
”:
temperature numerical value
Main display area:
When ECG leads is attached on the patient and connected to the monitor well, ECG waveform will
be displayed in the main display area.
Prompt Info:
“Probe off”:
the SpO
2
sensor is disconnected from the monitor or off from the patient.
“03”:
Patient ID number.
“11:30:25”:
the current time.
4.2.2 Operation Instructions
“
” key:
select ECG lead. When ECG is monitored, press this key to switch the ECG lead
among
Ⅰ
,
Ⅱ
,
Ⅲ
, aVR, aVL, aVF and V.
“
7
” key:
freeze ECG waveform or Plethysmogram on the screen.
“
” key:
shift display mode.
“
” key:
print ECG waveform. Press it again to stop printing.
“
” key:
start/cancel NIBP measurement.
“
” key:
Alarm silence switch, press it to enable/disable alarm silence.
“
S
”/ “
T
”key
：
change ECG waveform scale.
