User Manual for Vital Signs Monitor
26
4.6.1 Operation Instructions
1.
Press “
■
” key to confirm “view”.
2.
Then press “
▲
” key or “
▼
” key to shift yellow selecting box to choose a record. After pressing “
■
”
key to confirm, its recorded ECG waveform will display on screen.
Figure 4.9 Recalled ECG Waveform
3.
Press “
▲
” key or “
▼
” key to turn to the previous/next page to view recalled ECG waveform.
4.
Press “
■
” to back to Default ECG Recall screen.
Note:
If the setting of “store” on ECG TEMP setting screen is “off”, thereafter the ECG data measured will
not be stored.
4.7 Setup Menu Screen
At any display view screen, long time press “
Display” key to shift the screen to Setup Menu screen, as
shown in Figure 4.10. All the functional parameters of the system can be set through Setup Menu.
Figure 4.10 Setup Menu Screen
There are 8 functional groups for setting parameters: “ECG TEMP, SpO
2
, NIBP, Nurse Call, System, Patient
Info, Date/Time and Default” on the Setup Menu Screen.
1. Press“
▲
” key or “
▼
” key to shift cursor to corresponding functional group setting.
2. Pres “
■
” key to confirm and enter into corresponding functional parameter setup screen.
3. Pres “
” key under the setup menu will print ECG waveform.