User Manual for Vital Signs Monitor
34
4.7.7 Date/Time
Figure 4.17 Data/Time Setup Screen
Screen Description:
“yy 07 mm 09 dd 21”:
date setting, “07-09-21” shows the date is September 21
st
, 2007.
“hh 10 mm 15 ss 20”:
time setting, “09
：
20
：
21” shows the time is10:15:20.
4.7.8 Recover Default Settings
On Setup Menu screen, press “
▲
” button or “
▼
” button to shift cursor to “
Default
”, and then press “
■
”
button, all the setting parameters will be reset to factory default setting value.
4.8 Power Saving Mode
On the initial display screen, you can make the monitor stay in power saving mode for power saving.
Short time press power button to shift screen to “Power Saving Mode” display screen, as shown in Figure
4.18.
Figure 4.18 Power Saving Mode
Press “
▲
” button or “
▼
” button to shift cursor to “yes” or “no” and press “
■
” button to confirm. If your
selection is “yes”, all the numerical values displayed on digital LEDs display become darker and the
monitor stays in power saving mode.
Short time press power button again to shift screen to “Power Saving Mode” display screen for exiting the
sleeping mode.
