User Manual for Vital Signs Monitor
20
“PI: 3‰”:
the perfusion index is 3‰; it displays only when “Setup Menu
→
SpO
2
→
PI Display” is
set as “ON”.
Note:
PI display function is optional and it needs hardware support.
Main display area:
When ECG leads is attached on the patient and connected to the monitor well, ECG waveform will
be displayed in the main display area. Meanwhile HR value will show on digital LED.
When SpO
2
probe is clipped on the patient and connected to the monitor well, SpO
2
plethysmogram will be displayed in the main display area.
Prompt Info:
Status or event indication segment:
This segment will display the ECG leads status, probe status, alarm silence counting-down timer,
automatic NIBP measurement counting-down timer, over limit warning and other error messages
for technical warning. If more than one event occurs or more status appears, the indication message
will be displayed alternately at this segment.
“NIBP C-D: XXX”:
the counting-down timer of NIBP measurement is XXX seconds. This prompt
message appears only when the NIBP measuring mode is set as “AUTO X”.
“mute C-D: XXX”:
the counting-down timer of alarm silence is XXX seconds. This prompt
message appears only when the alarm silence is enabled.
Patient ID segment:
“03”:
Patient ID number.
Real time clock segment:
“11:30:25”:
the current time.
4.1.2 Operation Instructions
“
” key:
select ECG lead. When ECG is monitored, press this key to switch the ECG lead
among
Ⅰ
,
Ⅱ
,
Ⅲ
, aVR, aVL, aVF and V.
“
7
” key:
freeze ECG waveform or Plethysmogram on the screen.
“
” key:
shift display mode among 5 display views: ECG & SpO
2
monitoring screen (default
screen), ECG monitoring screen, trend graph screen, NIBP list screen and ECG waveform recall
screen.
“
” key:
print ECG waveform. Press it again to stop printing.
“
” key:
start/cancel NIBP measurement.
“
S
”/ “
T
”key
：
change ECG waveform scale.
