User Manual for Vital Signs Monitor
19
Chapter 4 Operations
4.1 Initial Monitoring Screen
When the parameter configuration of monitor is “ECG+SpO
2
+NIBP”, once powered up, the LCD will
display the initial monitoring screen, this is the default display screen as well.
When the parameter configuration of monitor is “SpO
2
+NIBP”, the screen will not display ECG waveform
and data, but the operation is similar.
Figure 4.1 ECG &SpO
2
monitoring screen
（
Lead off & Probe off
）
Insert the ECG cable and SpO
2
probe cable into the socket labeled “ECG” and “SpO
2
”, then attach the ECG
leads to the electrodes placed on human body, clip the SpO
2
probe on patient’s finger. The LCD will display
ECG waveform and plethysmogram at the same time (as shown in Figure 4.2).
Figure 4.2 ECG &SpO
2
monitoring screen (Default display screen)
4.1.1 Default Display Screen Description
Title area:
“II ×1”
：
ECG lead status and ECG waveform scale.
“ECG”:
indicate the current monitoring parameter is ECG.
“36.8
℃
”:
temperature numerical value
