Gigaset SE505 Manual Download Page 5

Page: 5 / 142

Contents

Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-2-19 / 505_RouterIVZ.fm / 15.06.2004

The user interface . . . . . . . . . . . . . . . . . . . . . . . . . 45

General configuration with Basic Setup . . . . . . . 51

Select Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Configuring Internet access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Internet Service Providers for Germany and Austria . . . . . . . . . . . . . . . . . . . . . . . 52

Other Internet providers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Testing the WAN connection and completing the configuration . . . . . . . . . . . . . . . . 57

Configuring security measures . . . . . . . . . . . . . . . 59

Assign password   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59
Setting the SSID and making it invisible  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60
Setting the Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  61

WPA-PSK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

WEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Allowing selected PC's access your local network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Saving the router configuration and completing the setup . . . . . . . . . . . . . . . . . . . . 65

Configuration with Advanced Setup . . . . . . . . . . 66

Configuring wireless connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Setting the Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

WPA encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Access control to local network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Wireless Distribution System (WDS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
LAN Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Defining the router's private IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Using the universal plug and play function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Configuring the DHCP server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

WAN Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Filtering Internet access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Preventing ping attacks from the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Restricting access of local PC's to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Restricting access to certain Internet domains and sites . . . . . . . . . . . . . . . . . . . 82

Setting up the router as a virtual server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Opening the firewall for selected PC's (DMZ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Port Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Activating dynamic DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Summary of Contents for SE505















































































































































Search results

Summary of Contents for SE505

Reviews:

Gigaset SE505, Manual, Page: 5 / 142

Search results

Summary of Contents for SE505

Reviews: