Gigaset SE505 Manual Download Page 90

Page: 90 / 142

Administration of the Gigaset SE505 dsl/cable

Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / admin_router.fm / 15.06.2004

Setting the time and time zone

To set the time or the time zone on your router, proceed as follows:

In the

Administration

menu, select

Time

Set the time

You can set the time on your router in one of two ways:

Manually
To do this, select the

manual

option in the

Set Time By

window.

You will now see boxes in which you can enter the year, month, day, hours and min-

utes.

Automatically
To do this, select the

Time Server

option in the

Set Time By

window.

Enter the name or IP address of a Time Server in the

Time Server

window.

Click on

Refresh

to obtain the current time from the Time Server.

Click on

APPLY

to apply the settings.

Possible time servers include:

ptbtime1.ptb.de

ntp.curie.fr

tempo.cstv.to.cnr.it

ntp0.nl.net

chronos.csr.net

Summary of Contents for SE505















































































































































Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands

Gigaset SE505, Manual

Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands