Gigaset SE505 Manual Download Page 106

Page: 106 / 142

103

Appendix

Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / appendix.fm / 15.06.2004

Restoring the Router's factory settings

If you have made configuration settings on the router in error, with the result that you

can no longer access the router's configuration interface, you can reset the router to its

factory settings.
You may need to do this, for example, if you have forgotten your password, if you have

activated WEP encryption but have forgotten the key for configuring the network adapt-

ers, or if you activate the access control for wireless access to the local network but the

access list is empty (see page 64).

To reset your router to its factory settings, proceed as follows:

Switch off the router by unplugging the power cord from it.

Press and hold down the reset button on the rear of the device.

Still holding the reset button, switch the router on again. Plug the power lead in

again as well.

Wait at least 7 seconds. Then release the reset button.

It will take a few seconds for the router to restart. You can now log on again and config-

ure the router once more.

Remember that a complete router reset will reset

all

your configuration

settings to the factory settings. This means that you will have to reconfig-

ure your router from scratch.

Summary of Contents for SE505















































































































































Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands

Gigaset SE505, Manual

Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands