77
Configuration with Advanced Setup
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / configure_router.fm / 15.06.2004
u
IP Pool Range
In
enter the range of IP addresses which the router should use for auto-
matically assigning IP addresses to the PC's.
Enter the first and last addresses.
In the bottom half of the screen you can create a list of PC's to which the DHCP server
will always assign the same IP address. This function is useful when you wish to define
filter rules for certain PC's or forward ports to certain PC's (refer to "Filtering Internet
access" on page 81 or "Port Forwarding"
on page 84). The relevant PC must always have
the same IP address.
You can create the list of PC's in two ways:
u
From the list of logged-in PC's.
You should use this option when the appropriate PC's are logged on.
– To do this, select the
List of logged on PC's
option in the
Define New Entry
win-
dow.
– From the list, select the PC's you wish to add to the list, then click on
Add to list
.
u
By entering their
You should use this option when the PC's you wish to add to the list are not currently
logged onto the router.
Note
: You can find out the MAC addresses of the wireless network adapters of the
PC's with the command
ipconfig /all
on the relevant PC's.
– In the
Define New Entry
window, select
MAC Address
.
– Now enter the MAC addresses of the PC's you wish to add to the list. To improve
clarity, type in a name for the PC, then click on
Add to list
.
u
To remove an entry from the list, click on
Delete
in the right hand column of the list
entry.
u
Click on
APPLY
to apply the settings.
i
The first three fields of the first and last IP address always have the
first three fields of the router's IP address as their default setting
because the subnet mask is always 255.255.255.x. This means that
the first three address segments for all network components must be
identical.
