19
Configuring the local network
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / configure_tcpip.fm / 15.06.2004
Network configuration for Windows 98, 98 SE, ME
To integrate a PC with Windows 98, 98 SE or ME in a local network, you must carry out
the following steps:
1. Set up the PC as the Client for Microsoft Networks (see below).
2. Select computer names and workgroup (see page 20).
3. Install the TCP/IP protocol (see page 21).
4. Make TCP/IP protocol settings (see page 22).
5. Deactivate the http proxy (see page 26).
6. Synchronise the TCP/IP settings to the Gigaset SE505 dsl/cable (see page 27).
Setting up a PC as a Client for Microsoft Networks
Before the PC's on your network can work together, you have to configure them as
Microsoft Network
. This is done as follows:
u
Click on
Start
–
Settings
–
Control Panel
.
u
Double click on the
Network
icon and open the
Configuration
tab in the
Network
window.
u
Check whether the list of components contains the entry
Client for Microsoft Net-
works
.
u
If it is not there click on
Add
.
u
Select
Client
as the network component type and click on
Add
.
