71
Configuration with Advanced Setup
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / configure_router.fm / 15.06.2004
Proceed as follows to activate 802.1x:
u
Choose
Network authentication
in the 802.1x field.
u
In the
Radius Server
field, enter your RADIUS server.
u
In the
Radius Port
field enter the port number used for the RADIUS service (default
value is 1812).
u
In the
Radius key
field, enter a keyword conforming to the conventions of the
RADIUS servers, which is to be used by the server for authentication.
u
Click on
APPLY
.
WEP encryption
If WPA is not supported by all network components, we advise you to activate the
on your wireless network components.
To do this you must perform the following steps:
1. In the
Network authentication
field, select the
Deactivated
setting.
2. In the
Data encryption
field, select
WEP-65
(for a 64 bit key) or
WEP-128
(for a 128
bit key) and Hexadecimal or ASCII as the format in the
Input mode
field.
3. In the next field enter a key of your choice.
4. Activate WEP encryption on the wireless network adapters and enter the generated
64 or 128 bit key.
You must use the same keys for encryption and decryption for the Gigaset SE505 dsl/
cable and all your wireless network adapters.
i
You will find a detailed example of how to set WEP encryption in the doc-
ument entitled "Practical Tips and Configuration Examples" on the accom-
panying CD.
