Gigaset SE505 Manual Download Page 129

Page: 129 / 142

126

Glossary

Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / glossary.fm / 15.06.2004

DSL

Digital Subscriber Line
DSL is a data transmission technique in which a connection to the

Internet

can be run

at 1.5

Mbps

over normal telephone lines. A DSL connection is provided by an

Internet

Service Provider

. It requires a DSL modem.

Dynamic IP address

A dynamic

IP address

is assigned to a network component automatically by the

DHCP

This means that the IP address of a network component can change with every login or

at certain intervals.
See also:

Static (fixed) IP address

DynDNS

Dynamic DNS
Domain Name Service (

) is used to assign

and

. For

this service is now enhanced with so-called Dynamic DNS

(DynDNS). This permits the use of a network component with a changing IP address as

Server

on the Internet. DynDNS ensures that a service can always be addressed on the

Internet

under the same Domain name regardless of the current IP address.

Encryption

Encryption protects confidential information against unauthorised access. With an

encryption system data packets can be sent securely over a network. The Gigaset SE505

dsl/cable offers, for safe data transmission in wireless networks,

WEP

encryption or WPA

encryption.

Ethernet

Ethernet is a network technology for local networks (

LAN

) and has been defined by the

IEEE

as Standard IEEE 802.3. Ethernet uses a base band cable with a transmission rate

of 10 or 100

Mbps

Firewall

Firewalls are used by network operators as protection against unauthorised external

access. This involves a whole bundle of hardware and software actions and technologies

that monitor and control the data flow between the private network to be protected and

an unprotected network such as the

Internet

Summary of Contents for SE505















































































































































Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands

Gigaset SE505, Manual

Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands