Gigaset SE505 Manual Download Page 49

Page: 49 / 142

The user interface

Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / configure_router.fm / 15.06.2004

You will now see the start page.

Selecting the language

The first time you launch the user interface it will appear in English. If you do not want

to change the language, you can skip this section.

If you wish to change the user interface language to German, French, Italian, Span-

ish or Dutch, select the required language from the

Select your language

pick list.

If the language you require is pre-installed, the user interface will now be displayed

in this language.

If the appropriate language has not been pre-installed, you must update the

firmware. You will see a prompt - click on

to confirm. This opens the

Firmware

screen.

Load the installation CD supplied into your CD-ROM drive and click on

Browse.

English and German are pre-installed at the factory.

Summary of Contents for SE505















































































































































Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands

Gigaset SE505, Manual

Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands