8
The Gigaset SE505 dsl/cable
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / introduction.fm / 15.06.2004
Procedure for installation and configuration
1. First install an Ethernet network card or a wireless
such as the Gi-
gaset PCI Card 54 or Gigaset PC Card 54 in the PC's you want to connect with the Gi-
gaset SE505 dsl/cable. The installation procedure can be found in the product's User
Guide.
2. Now install the router (refer to the section entitled "Installing the Gigaset SE505 dsl/
3. Before the PC's can communicate with the router and with each other in a local net-
work, you have to change their network settings. Configure these network settings
on
one
PC first so that it can establish a connection to the router. You can then use
that PC to configure the router. To find out how to do this, refer to "Configuring the
4. In a wireless connection you establish the link from the PC's wireless network adapt-
er to the router. This is described in the network adapter's operating instructions.
5. Now configure the router to activate the router's Internet access (refer to the section
"General configuration with Basic Setup" on page 51).
This will require the access data from your Internet Service Provider.
6. If you want to connect more PC's to the router, configure their network settings to
set up the local network (refer to the section entitled "Configuring the local network"
7. If you wish to use the router's other functions, e.g. the comprehensive security fea-
tures, use the router's Security Setup (see page 59) or Advanced Setup (see
i
When installing wireless network adapters you should note the fol-
lowing:
The default
of the Gigaset SE505 dsl/cable is
ConnectionPoint
.
