Gigaset SE505 Manual Download Page 96

Page: 96 / 142

Administration of the Gigaset SE505 dsl/cable

Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / admin_router.fm / 15.06.2004

Saving and restoring a configuration

Once you have configured your router, it is advisable to back up the settings. Then you

can restore them at any time, should they be accidentally deleted or overwritten.

In the

Administration

menu, select

Backup and Restore

Save configuration data

Click on

Backup

Your browser opens a file selection window where you can specify the file you wish

to store in the backup file. On your local PC select a directory where you wish to store

the configuration file, and enter a name for the file.

Once the procedure has been completed, the current configuration data of your router

will have been backed up in the specified file.

Restoring the back-up

Click on

Browse

and in your file system select the backup file with which you wish

to restore the configuration.

Click on

Restore

A window will appear prompting you to confirm the restore. Click on

The next window will warn you that the router will not be available for a short while

during the procedure. Click on

to close this message.

The configuration will now be updated.

If you have loaded a new firmware version onto the router before reset-

ting the configuration, the configuration will not be restored in a small

number of cases. If this happens, the saved old data will not match the

new firmware.
In this case, we recommend that you reset the router to its factory

defaults (see page 103) and manually re-enter the configuration data.

Summary of Contents for SE505















































































































































Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands

Gigaset SE505, Manual

Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands