Gigaset SE505 Manual Download Page 46

Page: 46 / 142

Configuring the local network

Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / configure_tcpip.fm / 15.06.2004

Synchronising the TCP/IP settings with the Gigaset SE505 dsl/cable

You have now configured your computer so that it is ready to be connected to the

Gigaset SE505 dsl/cable. You now have to release the old TCP/IP settings and synchro-

nise them with the settings of your Gigaset SE505 dsl/cable.

Click on

Start

–

Programs

–

Accessories

–

Command prompt

in Windows Desktop.

In the

Command prompt

window enter the

ipconfig /release

command and press

the ENTER KEY.

Then enter the

ipconfig /renew

command and press the ENTER KEY.

If the router's default IP address (192.168.2.1) was not changed, the IP address

should now read 192.168.1.x (x being a number between 2 and 254). The

Subnet

Mask

must always be 255.255.255.0 and the

Default Gateway

must have the

router's IP address (192.168.2.1). These values confirm that your Gigaset SE505 dsl/

cable is working.

Enter

exit

and press the ENTER KEY.

Summary of Contents for SE505















































































































































Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands

Gigaset SE505, Manual

Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands