Gigaset SE505 Manual Download Page 7

Page: 7 / 142

Safety precautions

Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / introduction.fm / 15.06.2004

Safety precautions

Only use the mains adapter (12V DC 1A) that is supplied with the Gigaset SE505 dsl/

cable. Comply with the connection values and ratings when connecting the device

to the mains.

Protect the equipment from moisture.

Never open the device. For electrical safety reasons it may only be opened by author-

ised service technicians.

The router may affect medical equipment. Take account of the technical conditions

in the relevant environment.

Make sure you include these operating instructions when you pass on your Gigaset

SE505 dsl/cable to someone else.

Please dispose of the Gigaset SE505 dsl/cable in an environmentally friendly man-

ner.

Trademarks

Microsoft, Windows 98, Windows 98 SE, Windows ME, Windows 2000, Windows XP and

Internet Explorer are registered trademarks of the Microsoft Corporation.
Netscape, Netscape Navigator and Netscape Communicator are registered trademarks

of the Netscape Communications Corporation.

Summary of Contents for SE505















































































































































Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands

Gigaset SE505, Manual

Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands