Gigaset SE505 Manual Download Page 91

Page: 91 / 142

Administration of the Gigaset SE505 dsl/cable

Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-19 / admin_router.fm / 15.06.2004

Setting the Time Zone

Information about the time zone is important for various time-dependent operations on

the Internet. For example, the data packets sent in a particular country have to be sorted

in the correct chronological order in the receiver's country. Access control to particular

services can also be defined using time-based rules.
If you have configured your router with Basic Setup, then the time zone was automati-

cally defined according to your setting for the

Country

. You can change the setting

here.

Select your time zone from the selection list.

If your time zone has summer and winter time, select

Daylight Saving

and use the

pick lists to specify the start and end of summer time (daylight saving).

Click on

APPLY

to apply the settings.

Summary of Contents for SE505















































































































































Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands

Gigaset SE505, Manual

Search results

Summary of Contents for SE505

Reviews:

Related manuals for SE505

Brands by name

Popular brands