4 Working with the master
If some of the components were not recorded correctly, press button (1) to close the dia-
log, switch the master off, check that all components are connected correctly and then
switch the master on again.
If all valves were recorded correctly, confirm dialog positively with button (2).
The master overview appears. The detected components are initialized.
The pre-configured applications can already be opened and parameterized using the
functional elements in (1) without starting them. The
Run
button (2) is still inactive.
After successful initialization, a message (3) additionally appears. The
Run
button
(2) becomes active.
Press the
Run
(2) button to start normal operation. This button only becomes active if it
was positively confirmed that all components were detected, and the initialization of the
components was completed afterwards.
Thus, the main menu is also displayed completely.
20
Summary of Contents for Hycleen Automation System
