GF Hycleen Automation System, User Manual

Page: 13 / 57

3 Installation
Where required: Connect sensor(s) to the valve
Sub-standard assembly can cause malfunctions!
If the cabling is carried out with the power supply switched on, this could cause dam-
age to the electronic components!
Make sure that the master is not supplied with power while cabling!
Sub-standard assembly can cause malfunctions! If the connection is carried out with the
power switched on it can result in damage to the electric components! Make sure that
the master is not supplied with power during the connection! Connect plug (5) of the
sensor to the sensor connection (4). During the switching on process of the master, the
sensor is automatically detected.
Connecting other valves
Connect one of the plugs of the next connecting cable to the second M12 plug (3) of the
valve and fasten with a knurled screw, etc.
Sub-standard assembly can cause malfunctions!
If the knurled screw is not tightened correctly, the connection can work loose
over time. This causes the system to malfunction!
Make sure that all knurled screws of the connecting cables are
tightened!
13