GF Hycleen Automation System, User Manual

Page: 9 / 57

3 Installation
3 Installation
The insulation of the valves must be removed for cabling the valves.
To remove the insulation, carefully pull apart both parts (1, 2). Make sure that the tem-
perature sensor cable is not detached or damaged.
Put the insulation aside for later assembly.
After assembling each valve, remove the detachable part (3) of the label from the valve and
stick it in the installation plan. This part contains information about the valve type, serial number
and size etc., and serves the subsequent identification of the valve in the installation plan.
9