3 Installation
Sub-standard assembly can cause malfunctions!
If no component is connected to the left connection (1), the master will ignore the
right connection (2) during the booting procedure after switching on.
When switching on the components, start with the left line (1)!
Connect power supply cable to the connection (7) of the master. The other elements are
reserved for service purposes: Ethernet connections (3), UPS connection (4), USB
connections (5), potential-free switching contacts (6).
Connecting the valve
Sub-standard assembly can cause malfunctions!
If the cabling is carried out with the power supply switched on, this could cause dam-
age to the electronic components!
Make sure that the master is not supplied with power while cabling!
Connect the other plug (2) of the connecting cable to one of the two M12 plugs (3)
of the valve and fasten with a knurled screw. Both M12 plugs (3) of the valves are
equivalent.
12
Summary of Contents for Hycleen Automation System
