3 Installation
Installing the temperature sensor
The external temperature sensor (3, 9952.000, PT1000) is delivered with a converter (2,
output 4 - 20 mA) and connecting cable (1).
Screw the temperature sensor (3) with its screw-in thread AG ¼" to the desired point of
the installation.
Example:
Installation to a JRG LegioStop inclined seat valve:
Under JRG number 9951.xxx the temperature sensor (3) is delivered fully pre-installed
on a red brass pipe section (6, DN 15 or DN 20), complete with matching insulation (7),
which also offers room for the converter (2).
With this variation, only the pipe section (6) is installed to an appropriate point of the
installation.
Position the converter (2) in the included insulation (7).
16
Summary of Contents for Hycleen Automation System
