3 Installation
Sub-standard assembly can cause malfunctions!
If the cabling is carried out with the power supply switched on, this could cause damage to
the electronic components!
Make sure that neither the master nor powerbox(es) are supplied with voltage while
cabling!
Connecting master
Connect one of the plugs of the connecting cable to the
left
M12 connection (1) of the
master and fasten the knurled screw. After that the M12 (2) connection can also be
used, for example, (1) for one side of the building, and (2) for the other side.
Close the open M12 connection on the last valve with a protection cap (8).
When switching on the master, the valves coming from the master are numbered auto-
matically, starting with the left line (1). The components of the right line (2) are then fur-
ther numbered directly afterwards.
11
Summary of Contents for Hycleen Automation System
