GeoVision GV-AS Series Installation Manual Download Page 157

Page: 157 / 172

GV-ASManager Quick Start Guide

147

the drop-down list.

Event Monitor

Displays monitored events of doors.

5 Alarm

Monitor

Displays alarm events of doors.

Access Monitor

Displays access activities of doors.

7 MultiView

Displays live views of connected cameras from multiple IP
devices.

Information Window

Displays the information of doors, card readers and monitored
events.

9 Playback

Plays back recorded events from a compatible GeoVision IP
device.

10 Live Video

Displays the live view of one connected camera.

11 Camera

List

Displays a list of connected cameras.

Note:

After closing the main screen, GV-ASManager will continue to run in

Windows Task

Manager

5.3.2 Toolbar

Figure 5-4

The buttons on the Toolbar of GV-ASManager:

No. Name

Function

1 Login

Logs in the GV-ASManager.

2 Logout

Logs out the GV-ASManager.

3 Devices

Defines controllers and doors.

4 Cameras

Searches the GV IP devices on the same network.

Summary of Contents for GV-AS Series













































































































































































Search results

Summary of Contents for GV-AS Series

Reviews:

Related manuals for GV-AS Series

Brands by name

Popular brands

GeoVision GV-AS Series, Installation Manual

Search results

Summary of Contents for GV-AS Series

Reviews:

Related manuals for GV-AS Series

Brands by name

Popular brands