GeoVision GV-AS Series, Installation Manual

Page: 101 / 172

Optional Devices
91
4
4.1.5 Web-Based Configurations of GV-AS100/GV-AS110
Through GV-ASBox, GV-AS100 or GV-AS110 can communicate with GV-ASManager over
the network. Also through GV-ASBox, you can access the GV-AS100/GV-AS110’s Web
interface.
Designed for use on the network, GV-ASBox must be assigned an IP address to make it
accessible. Follow these steps to network GV-ASBox:
1. Connect the network cable to the Ethernet port on GV-ASBox.
2. Use a computer on the same LAN with GV-ASBox to assign the IP address.
•
The default address of GV-ASBox is •
The default Username and Password for login are admin
Note the computer used to set the IP address must be at the same network or subnet
sequence assigned to GV-ASBox.
3. GV-ASBox is able to support two network environments: Fixed IP and DHCP. See
4.1.5.A Installing GV-AS110/GV-AS110 on a Network for further setup.
4. To configure the Advanced Setting on the Web configuration interface, set the Web
Setting switch on GV-ASBox to be ON.