GeoVision GV-AS Series, Installation Manual

Page: 71 / 172

GV-AS400 Controller
61
3
[Interlock] When the option is enabled, the two mentioned doors will be interlocked,
allowing only one door to be opened at a time.
[Events]
Set the parameters for the events.
• When Door Control is selected in the Function Setting page (Figure 3-20), these
options become available:
Option Description
Anti-Passback Enables or disables the Anti-Passback function.
Lock Reset Time Sets the time (1 to 255 sec.) that a door remains open after which
the door will automatically be locked.
Held Open Time Sets the time (5 to 9999 sec.) that a door can be held open before
an alarm is generated.
Fire Action Locks or unlocks the door when a fire condition occurs. Otherwise,
remains the door’s current state by selecting
Unchanged .
Alarm Continuous
Time Sets the time (1 to 10 sec.) that the alarm will continuously go off
before it ends.
• When Parking Control is selected in the Function Setting page (Figure 3-20), these
options become available:
Option
Description
Anti-Passback
See the same option above.
Relay On Time
Sets the time (1 to 255 sec.) that a gate remains open after which
the gate will automatically be closed.
Held Open Time
Fire Action
Alarm Continuous
Time
See the same option above.
• When Elevator Control is selected in the Function Setting page (Figure 3-20), these
options become available:
Option Description
Relay on Time
Fire Action
See the same option above.
Alarm Continuous
Time See the same option above.