manualshive.com logo in svg

GeoVision GV-AS Series, Installation Manual

Share
Download
GeoVision GV-AS Series Installation Manual Download Page 162

 

 

152 

„

 

Card Mode:

 This is the default mode. This mode only requires the user to present 

the card to be granted access.  

„

 

Release Mode:

 Keep the door in an unlock status with the reader.  

•

 

Release by Card:

 The door will unlock only after a card is presented and will 

remain unlocked during the time specified for Release Mode. This option is 
designed to prevent unattended doors from opening during the Release Mode. 

„

 

Card and PIN Code Mode:

 This mode requires the user to present the card and 

then enter the card’s PIN code on the keypad to be granted access. 

„

 

Card or Common Mode: 

This mode requires the user to present the card to be 

granted access 

OR

 enter the door’s password using the keypad to be granted 

access. 

5.  The settings in the Alarm Event and Camera Mapping section are OPTIONAL. For 

details on camera mapping, see 

Chapter 5 Video Integration

 in 

GV-ASManager User’s 

Manua

l.

 

6. Click 

OK 

several times

 

and return to the main screen. A controller folder tree will be 

displayed on the Device View window and you will see the 

 icon when connection 

between the controller and GV-ASManager has been established.  

 

Note: 

For the disconnection messages displayed on the Status column, see 

D. Controller 

Status in Appendix

 of 

GV-ASManager’s User Manual

.

 

 

Summary of Contents for GV-AS Series













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands