GeoVision GV-AS Series, Installation Manual

Page: 43 / 172

GV-AS110 Controller
33
2
Event Held Open Î 0
Forced Open Î 1
Tamper Î 2
Fire Alarm Î 3
Access Denied Î 4
Alarm Time Î 1-10 sec
1 to enable the option and 0 to disable the
option. For the third and fourth blank digits, type
the number of seconds the alarm will sound.
For example, to enable the fire alarm for 3
seconds, press
＊
7233103#
Door/Gate
Function
＊
343_#
Door Entry Type Î 0
Parking Entry Type Î 1
Door Exit Type Î 2
Parking Exit Type Î 3
Elevator Type Î 4
„
Door Entry Type : Sets GV-AS110 as entry
reader of a door. The Wiegand reader
connected will be set as exit reader.
„
Parking Entry Type: Sets GV-AS110 as
entry reader of a parking gate.
„
Door Exit Type: Sets GV-AS110 as exit
reader of a door. The Wiegand reader
connected will be set as entry reader.
„
Parking Exit Type: Sets GV-AS100 as exit
reader of a parking gate.
„
Elevator Type: GV-AS100 reader is
installed in the elevator for access control.
For example, to set the GV-AS110 as an exit
reader of a door, press
＊
3432#
Set
Authentication
Mode
＊
526_#
Schedule Mode Î 0
Fixed Card Mode Î 1
Local Lock Mode Î 2
Local Unlock Mode Î 3
Fixed Card + PIN Î 4
Fixed Card/Common Î 5
„
Schedule Mode: Follows the
authentication schedule set on GV-
ASManager.
„
Fixed Card Mode: Grants access after the
card is presented. Ignores the
authentication schedule of GV-ASManager.
„
Local Lock Mode: Remains locked. The
locked state cannot be cleared through GV-
ASManager.
„
Local Unlock Mode: Remains open. The
held-open state cannot be cleared through
GV-ASManager.
„
Fixed Card + PIN: Grants access after the
user presents the card and then enters the
card’s PIN code. Ignores the authentication
schedule of GV-ASManager.
„
Fixed Card/Common: Grants access after
card is presented or after the door’s
password is entered. Ignores the
authentication schedule of GV-ASManager.
For example, to enable the Fixed Card + PIN