GeoVision GV-AS Series, Installation Manual

Page: 129 / 172

Optional Devices
119
4
Output Condition Settings:
When Output Type (No. 1, Figure 4-33) is set to be Normal , Toggle , Pulse , Normal
Lighting , Toggle Lighting or Pulse Lighting , the options similar to the figure below
become available.
Figure 4-35
There can be a maximum of 4 conditions that can be set up to trigger an output. 2 conditions
are Door/Gate/Relay conditions and 2 conditions are Input conditions. Each condition is
related to each other through
AND/OR . AND means that all conditions with AND must be
triggered before the output is triggered. OR means that only 1 of the condition with OR is
needed to be triggered before the output is triggered. It is also valid to have certain
conditions as
AND and certain conditions as OR .
Only Output 5 ~ 8 can be connected to Lights. So Normal Lightning , Toggle Lighting and
Pulse Lighting can only be selected from Output 5 ~ 8 . For Pulse and Pulse Lighting , the
output is triggered for the amount of time set in the Sec field (seconds).
2 x Door/Gate/Relay Conditions
2 x Input Conditions
Available in
Pulse/Lighting