GeoVision GV-AS Series, Installation Manual

Page: 44 / 172

34
mode, press
＊
5264# .
Open door
with card
number and
PIN code
＊
_ _ _ _ _ _ _ _(_ _ _ _)#
Enter the 8-digit card
number and enter its 4-
digit PIN code.
To open the door without presenting a card,
enter the 8-digit card number on the back of the
individual card and its 4-digit PIN code.
Set ID
＊
743_ _ _#
Enter an ID number
between 0 and 255.
Set an ID number for GV-AS110 to a number
between 0 and 255.
For example, to set the ID number to be 3,
press
＊
743003#
Security Mode
＊
276_ _ _ _#
4 digits PIN code of the
security card.
In the Security Mode, no cards can be granted
access and no one can program the unit. Only
the Security Card can disable the Security
Mode.
To enable the Security Mode, press
＊
276 ,
enter the PIN code of the Security Card and
press
# . Present the Security Card.
To disable the Security Mode, simply press the
PIN code of the Security Card and present the
Security Card.
Two Person
Entrance
＊
873_#
Disable Î 0
Enable Î 1
When Two Person Entrance mode is enabled,
both Two Person A Card and Two Person B
Card must be presented to unlock the entrance.
To enable Two Person Entrance, press
＊
8731#
Two Person
Exit
＊
879_#
Disable Î 0
Enable
Î
1
When Two Person Exit mode is enabled, both
Two Person A Card and Two Person B Card
must be presented to unlock the exit.
To enable Two Person Exit, press
＊
8791#
Select Input
Contact Type
＊
426_ _ _#
NO Î 1
NC Î 0
Specify the input contact type of the door
sensor in the first blank digit, button in the
second blank digit and fire sensor in the third
blank digit. The default value is normally
opened (NO).
For example, to set the input contact type for
door sensor to be normally open (NO), button to
be normally closed (NC), and fire sensor to be
normally open (NO), press
＊
426101# .
Load Default
＊
362# To restore GV-AS110 to factory default, press
＊
362# . All configured settings will be cleared
and all cards will be deleted from GV-AS110.
Note: The Parking Entry Type and Parking Exit Type only work when the sensor input of
Car Detection is activated.