www.geosatpro.com
Toll Free 888-483-4673
47
Network Search
– Scans the Network
Information Table and logs any
services that the uplinker identified.
Note: Active only when scanning pre
programmed transponders.
Scan Mode
- Press LEFT or RIGHT
NAV key to select to either scan and
log channels using the pre programmed
transponder list, Blind Scan – Normal
search of the entire satellite with
user defined parameters for new
transponders and channel logging
with normal analysis, Blind Scan
– Detailed search of the entire satellite
with user defined parameters for new
transponders and channel logging with
extended analysis.
Symbol Rate
– Define the type of
transponders and channels logged by
limiting the symbol rate range. Press
LEFT or RIGHT NAV key to select All
symbol rates, High (>20K), Medium
(10K – 20K), Low (<10K).
Polarity
- Select the polarity to scan.
Press LEFT or RIGHT NAV key to
select All polarities, Horizontal (Left)
only, Vertical (Right) only
Search -
Press List/OK key to start.
Pre programmed TP
: Scan searches
the pre programmed transponder list
and logs all channels found to the TV
and Radio Channel Lists. This mode
will not find new transponders or
occasional use transmissions that are
not pre programmed into the receiver.
