B. Gohl
©
GEOSAT
pro
42
USALS Motor Type
- With USALS
selected, Press OK key
Use LEFT or RIGHT NAV key
to select if the install location’s
Longitude is East (E) or West (W).
North America is typically referenced
as the western hemisphere so select
W. Use the Numeric keys to enter the
install location’s Longitude as xxx.xx.
Press UP or DOWN NAV key to select
Local Latitude.
Press LEFT or RIGHT NAV key to
select if the install location’s Latitude
is North (N) or South (S). North
America’s Latitude is referenced as
North, so select N. Use the numeric
keys to enter the install location’s
Latitude as xx.xx.
Press UP or DOWN NAV key to
highlight OK or Cancel. If you wish to
save the current location coordinates,
select OK and press OK key. To exit
without adding new TP, select Cancel
and Press OK key.
Once the dish has been installed and properly aligned using USALS, the receiver
will automatically drive the motor to each satellite position when the satellite is
selected in the menus or when changing between channels located on different
satellites.
DiSEqC 1.2 Motor Type
- Follow these steps to configure the receiver to return to
the user assigned satellite positions once the motor is correctly installed. DiSEqC
1.2 does not calculate the satellites
position and the user must manually
locate and save each satellite’s
position.
Select Motor Type: DiSEqC 1.2
Press DOWN NAV to highlight Motor
Position
