GEOSATpro DVBS2 Owner'S Manual & Installation Manual Download Page 21

Page: 21 / 73

www.geosatpro.com

Toll Free 888-483-4673

Identify a reference point on the horizon like a tree, utility pole or other landmark

that lines up with the compass reading. Installers often find it easier to align the

dish if they can reference an object that has been identified with the compass

reading. If you cannot locate a visual reference, stretch a 10 - 20 foot rope out

in front of the dish in the direction of the compass reading pointing towards the

satellite.
Move directly behind the dish and align the dish so that the LNBF arm is aimed

directly at the reference landmark or in line with the rope. Semi-tighten the post

clamp nuts, but allow the dish to be just loose enough to be rotated left or right by

applying light pressure.

CAUTION: DO NOT ATTEMPT TO OPERATE ELECTRONIC

DEVICES IN AN UNSAFE LOCATION OR IN VIOLATION

OF SAFEGUARDS PROVIDED IN THIS MANUAL OR ANY

OTHER EQUIPMENT MANUAL PROVIDED WITH THIS

SATELLITE SYSTEM.

Remove the satellite receiver and remote control from the packaging. Inspect the

unit before operation. If any equipment is damaged or if you have any questions,

please immediately contact your reseller. Install the two included AAA batteries

into the remote control battery compartment.
The easiest method to aim the satellite dish is to temporarily place the satellite

receiver and a small television near the satellite dish. This method allows the

installer to see the signal changes that occur with small dish movements. It is

extremely difficult to install the satellite system if the TV is inside the home and

out of the view of the installer. Attempting to communicate the signal readings

with a second person viewing the TV will complicate the aiming process!

Connect Receiver to a TV

Summary of Contents for DVBS2










































































Search results

Summary of Contents for DVBS2

Reviews:

Related manuals for DVBS2

Brands by name

Popular brands

GEOSATpro DVBS2, Owner'S Manual & Installation Manual

Search results

Summary of Contents for DVBS2

Reviews:

Related manuals for DVBS2

Brands by name

Popular brands