www.geosatpro.com
Toll Free 888-483-4673
57
Press UP or DOWN NAV key to
highlight Save or Cancel. If you wish
to schedule the timer, select OK and
press OK key. To exit without saving
the timer setting, select Cancel and
Press OK key
Notice:
If the microHD is in standby mode when timer is scheduled, the receiver
will automatically Power ON one minute before the Start Time. The receiver will
automatically return to the previous channel or operation mode after the timer
ends
Two timers can be set to simultaneously record two different channels on the same
satellite and transponder. Start and stop times must be spaced one minute apart to
avoid conflict. A third channel or previously recorded program may be watched
at the same time.
If the system is motorized, allow extra lead on the start time to allow the motor to
position the dish
3.6 Parental Lock:
Prevents the unauthorized access to menus or limit channel
viewing. The default Lock Code is 0,0,0,0
Press UP or DOWN NAV key to
highlight Menu Lock.
Press LEFT or RIGHT NAV key to
select Off or On. Turning Menu Lock
On will require a password to enter
any menu. Default is Off
Press UP or DOWN NAV key to
highlight Channel Lock.
Press LEFT or RIGHT NAV key to
select On or Off. Turning Channel
Lock Off will disable the requirement
to enter a password for accessing
locked channels. Default is On
Press UP or DOWN NAV key to
highlight New Password
Use the numeric keys to enter a new
four digit code. Please be sure to
document this code and store in a
secure location. Passwords cannot be
retrieved and there is no master code
to unlock a personal password.
Press UP or DOWN NAV key to highlight Confirm Password