www.geosatpro.com
Toll Free 888-483-4673
43
Press LEFT or RIGHT NAV key or
press List/OK key to display scroll
list. Select a motor position number
(1 – 99) to save the satellite position
both the microHD and in the motor
memory or controller memory. The
motor position will be saved to this
assignment number in order for
the receiver to communicate with
the motor to return to the a specific
position.
Multiple satellites may be assigned
to the same motor position number.
Example C and KU band bands of the
same satellite position.
Reset All to 0
– To clear all saved
DiSEqC 1.2 motor position and
reset the microHD motor position
assignments to 0 (zero), highlight and
press OK key
To clear and reset all DiSEqC 1.2
motor position assignments, select
Yes and press OK key. To exit without
deleting the DiSEqC 1.2 position
settings, select No and Press OK key.
Press DOWN NAV key to select West
< Save > East. Press LEFT NAV key
to drive the motor West. Press RIGHT
NAV key to drive the motor East.
Once the signal confirms that the dish
is aimed at the correct target satellite
and is optimized, press OK key to
save. This DiSEqC 1.2 manual dish
positioning and saving must occur
for each DiSEqC 1.2 type motorized
satellite in the activated list.
