www.geosatpro.com
Toll Free 888-483-4673
25
Highlight Scan Mode. Press the
LEFT
or
Right
navigation arrow to
select either to scan the satellite by using
the Pre programmed TPs (transponders)
list, Blind Scan - Normal to search the
entire satellite for new transponders
and channels at a normal speed or Blind
16.
Scan - Detailed to search the entire satellite for new transponders and channels
at a slower speed with more detail and accuracy. For this example scan, use Pre
programmed TPs mode.
Highlight Symbol Rate. Press the
LEFT
or
Right
navigation arrow to
select if you wish to limit the range of
channels scanned by their Symbol Rate.
Select All, High, Medium or Low.
17.
If any channel displays a Signal Quality
reading below 50%, additional
fine tuning adjustments must be made.
Highlight Polarity. Press the
LEFT
or
Right
navigation arrow to
select if you wish to limit the polarity
scanned from All to Horizontal or
Vertical.
18.
Highlight Search. Press
OK
to
start scanning. The scan window will
display a list of transponders scanned
and a list of channels found sorted by
TV and a Radio.
19.
When the scan is complete,
Search End prompt is displayed. Press
OK
to exit the search screen, then
Exit
three times to exit the installation
menus.
20.
Congratulations! The installation is now complete. Now you may start watching
hundreds of free TV and listening to free Radio stations!
