B. Gohl
©
GEOSAT
pro
24
Example of Low Signal Quality reading that might be displayed as the
satellite signal is found, but aiming is not optimized.
Continue to optimize the dish aiming by making very small changes to the
elevation (up/down) and azimuth (left/right) to peak the Signal Quality reading.
Failure to optimize and maximize the Signal Quality reading may result in the loss
of programming during inclement weather.
12.
Example of optimized Signal Quality reading when dish aiming is correct.
Slight clockwise or counter clockwise adjustments to the LNBF rotation or sliding
the LNBF towards the reflector or away from the reflector may also provide
increased Signal Quality readings.
The higher the Signal Quality reading, the better the reception. If the Signal
Quality reading is too low, the picture will break up into little squares and the
sound may become garbled, out of sync, choppy or disappear completely!
Press
Exit
two times to return to
the main Installation menu. Highlight
Single Satellite Search. Press
OK
to
enter.
13.
Highlight Scan Type. Press either
the
LEFT
/
Right
navigation arrow
to select All Channels or FTA Only.
FTA Only mode searches only for free
channels and not scrambled.
14.
Highlight Scan Channel. Press
either the
LEFT
/
Right
navigation
arrow to select the type of channels
that you wish to scan. TV + Radio, TV
Channel, Radio.
15.