Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
02C100-7C0
GEA Niro Soavi
44
2.11 Disposal
The machine's materials must be disposed of according to their type. We list the materials used in
the various parts of the machine to facilitate disposal in accordance with local legislation.
1. The machine has been constructed with variable amounts of the following materials:
- Aluminium – parts.
- Stainless steel – parts and frame.
- Rubber and plastics – components.
2. Other materials present in smaller quantities:
- Tempered materials – pinions, shafts.
- Steel – nuts and bolts.
- Alloys.
- Cast iron
- Copper (electrical cables).
3. The machine contains lubricating oil:
Drain them off for sorted disposal
4. Electrical components:
Disassemble the electrical equipment (devices, cables, sheathing, tubes, etc.) for sorted disposal.
5. Plastic components:
Separate all plastic parts for sorted disposal.
CAUTION:
All these materials must be disposed of in accordance with local legislation in the country in
which the disposal is being done.
For sites and procedures, contact the local authorities.
Summary of Contents for Niro Soavi One7TS
Page 2: ......
