Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
02C100-7C0
GEA Niro Soavi
38
2.2.12 Electrical equipment
The machines are supplied in a standard execution without an electrical enclosure, which is designed
and fabricated in relation to the machine's specifications as an optional accessory; in any case, on
the back of the machine there is a terminal block which connects the on-board electrical equipment,
excluding the motors, and a local control panel
(2)
(fig. 2-15).
If the enclosure is supplied, it is contained in the stainless steel electrical housing,
(1)
in figure 2-15,
on the back of the machine.
It is recommended to locate the machine in a place that is as clean and dry as possible, ventilated,
well away from fumes, airborne dust, corrosive fumes, and in any case its characteristics of protection
from external agents must be suitable for the installation environment.
In addition, it is necessary to keep away from sources of heat so as to cause no local overheating
and to permit appropriate cooling of the electrical equipment.
With regard to the type, overall dimensions, weight and installation requirements of the electrical
enclosure, if supplied by
GEA Niro Soavi
, refer to the TECHNICAL SPECIFICATIONS enclosed with
Chapter 11 of this manual.
The enclosure's power line must be sized according to the length, type of installation, ambient
temperature, nature of the load and in any case in compliance with the regulations in force in the
country of installation.
Unless otherwise agreed in writing with
GEA Niro Soavi
, the user is responsible for rating the power
line and earthing system to the electrical enclosure's terminal block, as well as selecting the short
circuit and contact voltage protection equipment.
If
GEA Niro Soavi
supplies the electrical enclosure, we also supply a list of cables rated for a length
of 50 metres, routed in closed ducting with three-pole cable and ambient temperature 40°C.
With regard to the machine's power supply rating and connection diagrams, refer to the electrical
specifications and WIRING DIAGRAMS given in the enclosed Technical Specifications Dossier.
Summary of Contents for Niro Soavi One7TS
Page 2: ......
