Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
07C100-7C0
GEA Niro Soavi
156
Instructions for assembly
N.B.:
To facilitate the assembly of the gaskets, it is advised to grease them with food oil.
With reference to figure 7-26
- Insert the guide bushing
(7)
from the top into the homogenising chamber.
- Insert the gasket into the groove
(1)
in the homogenising chamber
- Set the homogenising chamber on one side and, in sequence, insert the impact head
(6)
, impact
ring
(5)
, gasket
(9)
, and passage head
(10)
.
- Check that the impact head slides freely in the guide.
- Insert the homogenizing chamber on the stud bolts and move it near to the head
- Position the gasket in the seat obtained in the head and rest the assembly on the head itself.
FIG. 7-26
Summary of Contents for Niro Soavi One7TS
Page 2: ......
